Month: April 2015

Back Yard Cleanup and Ramp

Starting to fill

Starting to fill

Following our back porch and garage demo, Sarah cleared a path in the back yard and last Friday the dumpster was delivered for all the debris. Unfortunately, even with careful loading and help from Dean we couldn’t fit everything in. Tuesday they swapped the full 30 yard dumpster for an empty 15 yard so we could get the rest of the debris cleared out.

Filled to the top

Filled to the top and getting picked up

Before loading the second dumpster, I harvested some of the materials to build a ramp. Our previous experience with heavy debris dumpsters has made it clear that we need a better way to dump full wheelbarrows of concrete and dirt. For the first half of loading, the door of the dumpster is open and it’s pretty straightforward, but after the dumpster starts to fill and the door is closed, it’s not so simple. Previously we wound up using buckets or in the case of concrete, unloading by hand. But building a ramp makes the whole process much easier, and since we’re going to have at least three full dumpsters of heavy clay, it’s worth doing.

Ramp design

Ramp design

After a bit of brainstorming the simplest way to make a ramp that would stand up to load after load of heavy wheelbarrows, I settled on a design and drew it in Sketchup, using the measurements of all the pieces from my drawing to make a part list. I picked out 2x6s of the appropriate size from the garage pile and cut them per plan and then assembled the thing. It actually worked out really well and I got the whole thing done in a couple hours.

Completed Ramp (also Derek)

Completed Ramp (also Derek)

The second half of the ramp is a level platform to make it easier to turn the wheel barrow and dump it in. I didn’t bother with Sketchup because it was all right angles. I just cut a stack of boards and then screwed it together. The tops of the ramp and platform are sections of roof from the garage. The idea is that the shingles will make it easier to get traction with the wheel barrow, especially since it will probably get pretty muddy. We also kept a couple of roof sections for the dirt ramp we’ll have into the basement once I remove the back steps.

Ramp and platform

Ramp and platform

We got the second dumpster filled and even had enough room left for Dean and Siobhan to bring over a couple of carloads of junk that’s been accumulating in their garage. I didn’t get a picture of it full, but imagine a full dumpster and there you go.

First dirt dumpster

The new dirt dumpster was just dropped off and we’ve got some work ahead of us. You can see how the ramp will help with the loading once the door is closed. Things are about to get busy!

Garage Demo

The garage

The garage (doors removed)

Our whirlwind of demo continues with the destruction of our terrible, terrible garage. The garage is a tragic story, really. A perfectly good, new, professionally built garage was put up a few years before we bought the house. Apparently it wasn’t big enough, though, so the previous owners poured a two foot concrete pad extension on one side, cut one wall off, and moved it over. Then they just added boards to bridge the gap and shingled over it. The main door was replaced with a larger one and at the back (yard side) they put a smaller door, which may or may not have been the original front garage door. In any case, the structure was badly compromised, and by the time we bought it, water, rats, roaches, and plants were getting inside. We’ve used it as-is for the last few years, with big plans for a flat-roofed masonry garage and a yard-side fireplace waiting in the wings.

Roof removal

Roof removal

With our basement dig out pending and a giant pile of debris from the porch in the back yard, we needed to tear down the garage to make way for dumpsters. Sarah’s parents came down to lend a hand on Saturday. There was some doubt as to how long the process was going to take, but we had the whole thing down by mid afternoon.

We wanted to get the yard closed off before calling it a day. We started work on the gate, but we only got one side up before it started getting late. By then dinner had arrived, so we propped up the other fence panels and called it a day. Sunday I broke down the garage pieces, we got the pad swept up, and I put together the rest of the fence and gate across the back.

Fence installation

Fence installation (also Derek)

The gate doesn’t work all that well at the moment. Because the new fence on the right doesn’t have very good footings and because I put in the posts with spikes instead of footings, the gate needs some center support to stay rigid. That in turn make it difficult to open and close. I may put a wheel on at least the left panel to make it easier to get the car in and out. When you open the right side gate, the fence leans enough that the neighbors side gate opens by itself. In any case, the garage is down and the first dumpster is on order for Friday, so now we need to get a path cleared in the yard!