Dean and Hector
Dean and his dad, Hector, came over on a Saturday to help me put up the drywall on the permanent walls in the basement. All of the permanent walls were also insulated with Roxul Safe’n Sound for sound proofing, as well as reducing both condensation on cold water pipes and heat loss on the hot water pipes. We’re using ⅝” moisture resistant (green board) drywall for all of the permanent walls in the basement. We’re still working on our water issues and I don’t want to replace anything we’re putting in because it got wet. Using ⅝” instead of ½” adds addition sound proofing and fire protection.
Insulating plumbing wall
Insulating between rooms
Drywall!
In the case of the bathroom, the first step (after putting up the ceiling) was to install the tile backer for the tub surround. We’d originally planned to install a fiberglass surround that fit the tub, but even though I ordered the correct piece I received the wrong one. We didn’t realize that until the plumbers tried to install it. When I went to get the right one I found they were out of stock across the city, so we just gave up and decided to tile it. It’s more work, but the cost is similar and it will look nicer, plus I’ve got a cool idea in mind that I’m going to try. I bought Hardibacker instead of regular cement board and screwed it to the studs with the appropriate special screws. After a variety of conflicting information and opinions from various sources, I elected to install the bottom edge of the backer board ¼” above the tub flange. In a couple of spots the gap was bigger than planned so I went behind and added some wood blocking between the wall studs.
Work in progress
Derek and Sarah checking out the progress
Carefully cut plumbing penetrations
It took most of the day, but we got all of the drywall hung. We have one section of exterior wall framed and drywalled right now because it has plumbing on it and we want to put cabinets on it. I got to use my collated screw gun (previously employed for screwing in the first floor subfloor) to rapidly put up screws with decent success not under or over-driving. My skill level is improving, but it does leave room for improvement. The rest of the exterior walls will be done when we refinish the basement into an entertaining space, and the temporary bedroom walls will be drywalled as soon as they’re framed. For the duration of us living in the basement we’ll have the exposed brick and rafters “loft” look, which is fashionable right now anyway. After hanging the drywall (and backer board) the next steps are mudding and taping the drywall and backer board seams.
As always, a big thanks go out to Dean and Hector. Once again they’ve been a huge help!
